| |
 |
|
SETBACK REQUIREMENTS
R-1 Single family residential
Front 25’
Side 15’ width sum of both side yards, 7’ minimum on one side*
Rear 25’
Where as no part of any structure, including eaves and overhangs,
may be closer than 6’ to a property line
R-1A Single family, two-family and duplexes
Front 12 ½’
Side 10’ width sum of both sides yards, 4’ least width on one side*
Rear 20’
Where as no part of any structure, including eaves and overhangs,
may be closer than 3’ to a property line
If an addition or alteration is made to a structure that is already not in
compliance, the addition or alteration may also not comply, however, the ‘
addition or alteration may NOT make the structure more out of compliance.
R-2 Single, two and multi-family dwellings, professional and semiprofessional
buildings, boarding and lodging houses
Single and two-family
Front- 25’
Side 12’ width sum of both side yards, 6’ least width on one side*
Rear 30’
Where as no part of any structure, including eaves and overhangs, may be
closer than 5’ to a property line
Single attached dwelling
Front 25’
Side 12’ width sum of both side yards, 6’ least width on one side*
Rear 30’
A dwelling unit with a zero side yard on one side shall have a minimum
width of a side yard of 12’ on the opposite side lot line
Multi-family and offices
Front 35’
Side 20’ width sum of both side yards, 10’ least width on one side*
Rear 40’
* Where as no part of any structure, including eaves and overhangs, may be
closer than 8’ to a property line
R-3 High Density- any permitted R-1, R-1A, or R-2 use and multi-family
including townhouses and condos. Individual buildings shall not contain more
than 5 units and land use density shall not exceed 20 dwelling units per acre of
land under ownership, exclusive of road right-of-way.
Single and two-family-
Front 25’
Side 12 width sum of both side yards, 6’ least width on one side*
Rear 30’
Where as no part of any structure, including eaves and overhangs, may be
closer than 5’ to a property line
Multi-family dwellings and townhouses
Front 25’
Side: 3 stories or less up to 35’ 10’/side*
Side: More than 3 stories up to 45’ 15’/side**
Side: Structures above 45’ 15’ + a foot for each foot above 45’
Rear 30’
Where as no part of any structure, including eaves and overhangs may be closer
than 8’ to a property line
** Where as no part of any structure, including eaves and overhangs may
be closer than 13’ to a property line
R-4 Mobile home park
See 3-15 and 3-16
C-1 General commercial
Residences permitted by special permit only
Front 25’
Side 30’ width sum of both side yards, 10’ least width on one side*
Rear 10’
All yards abutting a public thoroughfare shall be considered front yards
and shall comply with the requirements for a front yard. Side yards may be
waived by the council, for coordinated plans of adjacent properties under
separate ownership, providing, however, that such waiver shall predicated on
an approved Site Plan (see Article 4).
C-2 Central Business District
No setback requirements unless adjacent to an R district in case minimum
side yard shall be 10’ and rear yard shall be 25’
I-1 Light industrial
Front 45’*
Side- each side 10’**
Rear 45’**
All yards abutting a public thoroughfare shall be considered front yards
and shall comply with the requirements for a front yard.
** I-1 district adjacent to any R district- the minimum setback shall be 50’
from the I-1 district boundary line, except in such cases where the district
line is construed to follow the center line of a public thoroughfare, wherein
such cases shall be determined by the provisions for the required minimum
front yard depths.
I-2 Moderate industrial
All principal buildings and all accessory buildings or structures, including
loading and unloading facilities shall be located at least 200’ from any R
district and not less than 100’ from any other district except an I-1.
|
|
|
|
|
